GE GTWN4250DWS - Manual (Page 4)

4
Quick Start Guide
$ERXWWKHFRQWUROSDQHO³IRUPRGHOVZLWK67$57EXWWRQ
Load Size (on some models)
„ Add detergent to the bottom of the basket and fabric softener to the dispenser prior to loading clothes.
„ Loosely load items in the washer basket. Overloading may negatively impact wash performance.
Adjust the load size accordingly.
„ Make the load selection:
AUTOMATIC LOAD SENSING (on some models)
– For convenience, best performance and optimal efficiency, select AUTOMATIC LOAD SENSING on models that are
so equipped. This selection automatically provides the correct amount of water suited to the size and type of load
placed in the unit.
– If you prefer to manually select the water level, select SMALL through SUPER. While AUTOMATIC LOAD SENSING is
best for most loads and general washing, you may want to manually select the load size for specialty items such
as bulky, lightweight comforters or pillows, where you want to ensure a larger water level is applied. Manual load
size selections should be made for wet items placed in the washer, such as soaked towels or garments.
– The washer will not fill with water when automatic load sensing is selected if the lid is opened.
When the lid is closed the machine is able to begin filling with water in order to sense the load size.
NOTE: This is a high-efficiency washing machine. This system requires less water while providing effective cleaning
action. You may notice that the water level is lower than on your previous washer. This is normal.
or
Signal (on some models)
„ Select for an end of cycle signal.
A
Controls
AUTOMATIC LOAD
SENSING equipped
models
• Add fabric softener (on
models with a fabric
softener dispenser); see
page 6 for details.
• Add detergent. GE
recommends the use
of High Efficiency
detergents in all Energy
Star-rated washers.
• Select load size and
other wash options,
including Fabric
Softener option.
• Select wash cycle.
• Select OPTIONS.
Step 3
• Push START
Step 4 Step 2
• Add items.
• Close lid.
NOTE: Washer will not
start to fill with lid open
on Auto Load sensing
settings (on some
models).
A B C
D
E F
LOAD SIZE
OR SIGNAL
TEMPERATURE OPTIONS
START
STOP/PAUSE
A
Step 1