Step 4, connect power, Step 5, slide product into cutout, Step 6, set temperature controls – GE ZIDI240BII User Manual

Page 8: Caution, Attention, Installation instructions, Step 5 slide product into the cutout, Step 4 connect power, Step 6 set temperature controls

Advertising
background image

Pub. No. 31-51545-3
Part No. 197D5893P003

09-09 JR

Printed in Slovenia

NOTE: While performing installations described in this book,
safety glasses or goggles should be worn.

For Monogram

®

local service in your area, call

1.800.444.1845.

NOTE: Product improvement is a continuing endeavor
at General Electric. Therefore, materials, appearance
and specifications are subject to change without notice.

STEP 5 SLIDE PRODUCT INTO

THE CUTOUT

CAUTION:

Do not push against the

drawer panels with your knees. Do not push or lift
the unit by the drawer handles. Damage may occur!

ATTENTION :

Ne poussez jamais

les panneaux de tiroir avec vos genoux. Ne poussez
jamais votre appareil ou ne le soulevez jamais par
les poignées de tiroir. Vous pouvez l’endommager.

• Open one of the drawers and gently push the unit

back into the opening with your hands against the
sides. Be careful not to entangle power cord.

• Check again to be sure the unit is level. Adjust the

leveling legs until the unit is resting firmly against
the bottom of the counter to prevent rocking or
movement during operation.

• If alignment with adjacent cabinetry is an issue,

use a shim to secure the unit against the underside
of the countertop.

STEP 4 CONNECT POWER

• Connect power cord plug to a properly grounded

receptacle.

• Check to make sure power is on by opening a drawer

to see if interior light turns on.

• The interior fan runs all the time except when a

drawer is open.

See the Owner’s Manual for further explanation of
the fan.

STEP 6 SET TEMPERATURE CONTROLS

• The temperature controls are preset. Refer to

the Owner’s Manual for more information. Allow
12–24 hours for the temperature to stabilize.

NOTE: The Double-Drawer Refrigerator operates very
quietly. You may not notice the unit running, and when
first installed, the fans and motor may not come on
immediately – this is normal. If the display is lit and
the light is working, the unit is operating.

Installation Instructions

Advertising
This manual is related to the following products: