Advance planning for chimney hoods—wall-mount – GE ZV755SPSS User Manual

Page 5

Advertising
background image

48

Advance planning for chimney hoods—wall-mount

Product dimensions and clearances

This stainless steel hood can be installed over any Monogram

®

cooktop including a Professional 36" rangetop and a 36" or 30"
Professional range.

This vent hood must be installed 24" minimum to 30" maximum
above the cooking surface. The hood installation height, from
the cooktop surface to the bottom of the hood, depends upon
ceiling height.

Model ZV950SDSS
* 24-1/2" for 8' ceiling

36-1/2" for 9' ceiling
36" to 44" for 9' to 10'
ceiling. (For ceilings between
9'6" and 10', mount the
hood 30" above the
cooking surface.)

Note: The supplied two-piece duct cover is adjustable to
fit 8' to 10' ceilings. For ceiling heights greater than 10'
and up to 14', order ZX14SDSS stainless steel duct cover
accessory.

The distance between the cooking surface and the bottom
of the hood should be:

25-1/2" maximum for 8' ceiling height.
25-1/2" to 30" for 9' ceiling height.
30" minimum for 10' ceiling height.

Plan the installation height carefully to avoid unsightly gaps
above the hood. A mounting template is provided with the
installation instructions to help position the hood above the
cooking surface and to locate the mounting brackets.

Note: Install the hood 30" minimum above the cooking
surface over a Professional range or rangetop.

Installation over a professional range

or rangetop

The ZV950 hood must be installed 30" minimum above the
cooking surface of a Professional range or rangetop.
The ceiling height must be at least 8'5" for this installation
combination.

10"

*Height

to Ceiling

35-5/8"

605Dia146

25"

605Dia147

Installation

Height Depending

on Ceiling Height

36" Min.

Using duct cover accessories

A duct cover accessory may be required for your hood
installation height. Use this chart to accurately determine
installation height and the need for a duct cover accessory.

ZV950DSS duct

cover dimensions

ZX14DSS duct

cover dimensions

The serial plate is located behind the removable filters.

ZV950SDSS installation heights

Actual

ceiling height

Possible hood

installation

height*

Duct

cover

accessory

7' 11"

24-1/2"

Su

ppl

ie

d

8' 0"

25-1/2"

8' 1"

25-1/2" to 26-1/2"

8' 2"

25-1/2" to 27-1/2"

8' 3"

25-1/2" to 28-1/2"

8' 4"

25-1/2" to 29-1/2"

8' 5"

25-1/2" to 30"

8' 6"

25-1/2" to 30"

8' 7"

25-1/2" to 30"

8' 8"

25-1/2" to 30"

8' 9"

25-1/2" to 30"

8' 10"

25-1/2" to 30"

8' 11"

25-1/2" to 30"

9' 0"

25-1/2" to 30"

9' 1"

26-1/2" to 30"

9' 2"

26-1/2" to 30"

9' 3"

26-1/2" to 30"

9' 4"

26-1/2" to 30"

9' 5"

26-1/2" to 30"

9' 6"

30" minimum

9' 7"

30" minimum

9' 8"

30" minimum

9' 9"

30" minimum

9' 10"

30" minimum

9' 11"

30" minimum

10' 0"—14" 0"

30" minimum

ZX14SDSS

*Based on 36" countertop height.

Advertising
This manual is related to the following products: