GE ZISB360DX - Manual (Page 8)

8
Temperature Controls
Built-In Refrigerators
Temperature
controls
Changing
display
temperatures
from °F to °C
To change the temperature display
between Fahrenheit and Celsius, press
Temp Display °C/°F.
The temperature display shows the actual
temperature of the freezer and fresh food
compartments. The actual temperature will vary
from the set temperature based on factors such
as door opening, amount of food, defrost cycling
and room temperature.
NOTE: Frequent door openings or door left open
for periods of time may increase the internal
temperature of the freezer and fresh food
compartments temporarily.
To turn off the cooling system in both
the freezer and fresh food compartments, press
either
pad until both displays show OFF.
To turn the cooling system on, press either
pad. The preset temperatures of 0°F and
37°F will appear in the display.
To check the current temperature setting
for the fresh food or freezer compartment,
press the
or pad once. After 5 seconds,
the display will return to the
actual temperature.
To change the temperature settings, press
the
or pads to desired temperature set
point for fresh food and freezer
separately.
Allow 24 hours for the refrigerator to reach
the temperature you have set.
Temperature Ranges
Low High
Fresh Food
Freezer
NOTE: Setting the controls to OFF stops
cooling, but does not shut off electrical power
to the refrigerator.
34°F
1°C
–6°F
–21°C
45°F
7°C
+6°F
–14°C
Door
alarm
To turn the Door Alarm feature on, press
DOOR ALARM once. The ACTIVE light will come
on. To turn it off, press it again.
2QPRGHOVZLWKDGLVSHQVHUWKH'RRU$ODUP
feature is located on the dispenser panel on
the front of the freezer door.
When the DOOR ALARM
is active, the alarm will flash
and beep if you keep the door
open for more than 2 minutes.
3UHVHW6HWWLQJV 
Allow 24 hours to reach these preset temperatures.