GE ZIRP360NXLH - Manual (Page 14)

Installation Instructions
14
STEP 4 INSTALL ANTI-TIP BRACKET
(cont.)
5HPRYH*ULOOHVIRU$FFHVVWR$QWL7LS/RFNLQJ+RRNV
Fresh Food Unit
‡2SHQWKHDFFHVVGRRU
‡5HPRYHWKHVFUHZVIURPWKHJULOOH
‡3XOOWKHERWWRPRIWKHJULOOHIRUZDUGGRZQDQGRXW
to remove.
Freezer Unit
‡2SHQWKHDFFHVVGRRU
‡5HPRYHWKHVFUHZVIURPWKHJULOOH
‡3XOOWKHERWWRPRIWKHJULOOHIRUZDUGGRZQDQGRXW
to remove.
Power Cord
Locate the power cord inside the left cavity. If it has not
been adjusted so the plug is easily accessible,
do so now.
Move Unit into Final Position
‡0RYHUHIULJHUDWRUWRZDUGLWVILQDOLQVWDOOHGORFDWLRQ
Align the tabs on the wall bracket with the openings
in the back of the unit.
‡7KHXQLWKDV´/µEROWVLQWKHXSSHUOHIWDQGULJKW
FRUQHUVLQVLGHRIWKHDFFHVVFRPSDUWPHQW7KHVH
bolts will interlock with the wall bracket and secure
the unit using the washers and hair pin cotters
in the hardware kit once the unit has been leveled
and is in the final position.