GE ZIK30GNDII - Manual (Page 2)

For answers to your Monogram, ® Cafe ™ Series,
Profile ™ Series or GE ® appliance questions, visit
our website at geappliances.com or call GE
Answer Center ® service, 800.626.2000.
110120 Specification Created 2/13
Listed by
Underwriters
Laboratories
ZIC30GNDII/ZIK30GNDII
GE Monogram ® 30" Fully Integrated Customizable Refrigerators for
Dual Installation
Dimensions and Installation Information (in inches)
Customization Basics:
These refrigerators are factory set for a right hinged door
swing. The door swing is reversible. Choose an RH model
with hinge on the right side; the door swings left to right.
Choose an LH model with hinge on the left side; the door will
swing right to left.
Note:
For 84" panels, the top space behind the top panel can be
enclosed with wood and stained by the cabinet maker to
match adjacent cabinetry.
Door Handles
Custom handles of your choice, supplied by your
cabinetmaker, can be installed. If desired, you may order
WR12X10988 Monogram
® European stainless steel tubular
handle kit for custom panels.
Optional Accessory Kits
ZUG30: For side-by-side installation
European Handle Kit: can be purchased through GE Parts
store - WR12X10988
Door Swing Clearances
The installation must allow for clearances to adjacent walls or
cabinets. These refrigerators are equipped with a 2-position
door stop. The factory-set 115° door swing can be adjusted to
90° if clearance to adjacent cabinets or walls is restricted.
Product Dimensions
23-7/8"
Behind
Frame
36-3/4"
605Dia21
90 °
90 ° Door Swing
4" Min. to Wall
5" Min. for Professional Models
Allow 15" minimum clearances for a full 115° door swing.
• 5" minimum clearance is required when the door swing is
adjusted to 90°.
• See door swing illustrations to determine interaction with
adjacent cabinets or countertops.
605Dia20
25"
Min. to
Wall
130 °
130 ° Door Swing