Alliance Laundry Systems UVN255P - Manual (Page 20)

Cod. G522433
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 00/0510
Installation
20
DO NOT CONNECT THE HOT WATER TO INLET 1. THIS INLET DOES NOT HAVE A TEMPERATURE
CONTROL SYSTEM.
DO NOT CONNECT THE HOT WATER TO INLET 3 IF IT IS NOT CONFIGURED AS A DUAL HOT WATER
INLET FLOW.
INCOMPLIANCE OF THIS PRECAUTION CAN CAUSE FABRIC DAMAGE.
If there is no hot water supply, connect cold water or cold softened water to inlet 2.
ADAPT THE WASHER CONFIGURATION to operating with cold water.
fig. 15