GE ZIP360NZ - Manual (Page 2)

NOTES
STANDARD INSTALLATION
ANTI-TIP BRACKET CUSTOM SIDE PANELS
Product Specification Created 2/14
A Mounting the junction
box in this location will
also allow for front
accessability through
access panel.
B Water supply area
C The refrigerator is top
heavy and must be
secured to prevent the
possibility of tilting
forward.
• Cut a 2" x 4" block, 35"
long and secure the block
to the mounting brackets
provided using #12 or
#14 wood screws.
• Secure the bracket to
the back wall so that it is
84” (or your installation
height) from the floor. Use
#12 or #14 wood screws
and penetrate at least
1-inch into vertical wall
studs. Note: Alternative
securing method will
need to be used if wall
studs are metal. Refer to
installation instructions.
D When the refrigerator
is installed under a
soffit, if there is not
enough height for
the anti-tip bracket
method of security,
or if there are metal
wall studs, brackets
cannot be used. Refer to
installation instructions
for information on
securing refrigerator to
adjacent cabinetry or
soffit.
F Side panels must be
used whenever the sides
of the refrigerator will
be exposed. The 1/4”
side panels will slip
into the side case trim.
Secure the panels to
the refrigerator with
stick-on hook and loop
fastener strips. Order
the side panels from the
cabinet manufacturer.
ZIP360NZ GE Monogram ® 36" Built-In French-door Bottom-freezer
*84"
(213.4)
*Or installation
height from floor
2" x 4"
Cut to 35" Length
Screws mounted
into vertical wall
studs
24"
(61)
1 9/16"
(3.97)
3 1/8"
(7.93)
35 1/2"
(90.2)
2 5/16"
(5.874)
7/16"
(1.1)
Trim overlap
3 1/2"
(8.9)
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
*84"
(213.4)
*Trim will overlap
additional 7/16"
6"
(15.24)
10"
(25.4)
ELEC.
SIDE VIEW FRONT VIEW
5"
(12.7)
5"
(12.7)
WATER W
SIDE VIEW INSTALLED
UNDER SOFFIT
ZIP360NZ
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
1 7/8"
(4.8)
*3" - 4"
(7.6 - 10.2)
*Depending
on installation
height
24"
(61)
3/16"
(.5)
*84”
(213.4)
*Depending
on installation
2 9/16"
(6.5)
*84"
(213.4)
*Depending
on installation
SOFFIT
*84"
(213.4)
*Or installation
height from floor
2" x 4"
Cut to 35" Length
Screws mounted
into vertical wall
studs
24"
(61)
1 9/16"
(3.97)
3 1/8"
(7.93)
35 1/2"
(90.2)
2 5/16"
(5.874)
7/16"
(1.1)
Trim overlap
3 1/2"
(8.9)
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
*84"
(213.4)
*Trim will overlap
additional 7/16"
6"
(15.24)
10"
(25.4)
ELEC.
SIDE VIEW FRONT VIEW
5"
(12.7)
5"
(12.7)
WATER W
SIDE VIEW INSTALLED
UNDER SOFFIT
ZIP360NZ
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
1 7/8"
(4.8)
*3" - 4"
(7.6 - 10.2)
*Depending
on installation
height
24"
(61)
3/16"
(.5)
*84”
(213.4)
*Depending
on installation
2 9/16"
(6.5)
*84"
(213.4)
*Depending
on installation
SOFFIT
*84"
(213.4)
*Or installation
height from floor
2" x 4"
Cut to 35" Length
Screws mounted
into vertical wall
studs
24"
(61)
1 9/16"
(3.97)
3 1/8"
(7.93)
35 1/2"
(90.2)
2 5/16"
(5.874)
7/16"
(1.1)
Trim overlap
3 1/2"
(8.9)
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
*84"
(213.4)
*Trim will overlap
additional 7/16"
6"
(15.24)
10"
(25.4)
ELEC.
SIDE VIEW FRONT VIEW
5"
(12.7)
5"
(12.7)
WATER W
SIDE VIEW INSTALLED
UNDER SOFFIT
ZIP360NZ
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
1 7/8"
(4.8)
*3" - 4"
(7.6 - 10.2)
*Depending
on installation
height
24"
(61)
3/16"
(.5)
*84”
(213.4)
*Depending
on installation
2 9/16"
(6.5)
*84"
(213.4)
*Depending
on installation
SOFFIT
A
B
C
D
F