GE ZDWC240NBS - Manual (Page 2)

ZDWC240NBS – GE Monogram Stainless Steel Wine Chiller
Dimensions and Specifications (in inches)
Side-by-Side Installations
For answers to your Monogram, ® GE Profile ™ or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center ® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Locate
Outlet
34-1/2"-35"
24" Min.
48" Min.
6" Max.
Increase storage capacity by installing two Monogram wine chillers
together. Or for a complete refreshment center, install a beverage
center and wine chiller together.
• A side-by-side installation requires a 48" wide opening. No trim
kits required.
• Products must operate from properly grounded separate
receptacles.
Grounding the Wine Chiller
IMPORTANT – (Please read carefully)
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY
GROUNDED.
The power cord of this appliance is equipped with a 3-prong
(grounding) plug which mates with a standard 3-prong (grounding)
wall receptacle to minimize the possibility of electric shock hazard
from this appliance.
Have the wall outlet and circuit checked by a qualified electrician
to make sure the outlet is properly grounded.
When a standard 2-prong wall outlet is encountered, it is your
personal responsibility and obligation to have it replaced with a
properly grounded 3-prong wall out.
DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE
REFRIGERATOR TO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.
Tools Required
• #2 Phillips screwdriver
• 1" open-end wrench
• Torx screwdriver
• Flat edge tool
Hardware Supplied
• Monogram Badge
• Hardware for changing door swing
Specification Revised 4/06
120024