GE ZIF360NXRH - Manual (Page 5)

NOTES
1/4" FRAMED PANEL DIMENSIONS
3/4" OVERLAY PANEL DIMENSIONS
PANEL ASSEMBLY CROSS SECTION
PANEL ASSEMBLY CROSS SECTION
PANEL DIMENSIONS
PANEL DIMENSIONS
.25" + .10" + .75" = 1.10" Total Panel Thickness
3/4” Overlay Panels:
For a more custom appearance, overlay
panels may be installed on trimmed models.
The overlay panel must be secured to a
1/4"-thick backer panel which slides into
the trim. A spacer panel 0.10" thick must
be placed between the overlay and backer
panels.
Center each panel over the other. Assemble
the panels with glue and screws. Screws must
be countersunk into the backer panel.
NOTE: Left-to-right offset is not always equal
to top-to-bottom offset.
Maximum total panel weight:
• Door panel – 67 lbs.
• Grille panel – 11 lbs
Door Handles:
The supplied handles can be adjusted to
accommodate both framed or overlay panels.
Custom handles of your choice, supplied by
your cabinet maker, can also be installed.
ZKHPSS1: Professional Tubular Stainless Steel
Handle designed to fit 3/4" overlay panels.
Kits include one handle - 30 1/2" long.
ZKHSS2: European tubular stainless steel
handle designed to fit 3/4" overlay panels.
Kits include one handle - 64 1/4" long.
Trimmed refrigerators are designed to be
customized with decorative panels. Field-
installed custom door and grille panels are
required.
1/4” Framed Panels:
You may install 1/4"- thick custom panels from
your cabinet manufacturer. The decorative
panels slide into the factory- installed trim.
Maximum total panel weight:
• Door panel – 67 lbs.
• Grille panel – 11 lbs
Product Specification Created 3/14
ZIF360NXRH GE Monogram ® 36" Built-In All-Freezer
A B C
1/4" Backer Panel 33 7/8" 8 7/8" 69 5/16"
.10" Spacer Panel 32 1/2" 7 5/8" 67 15/16"
3/4" Overlay Panel 34 1/8" 9" 69 9/16"
A B C
1/4" Framed Panel 33 7/8" 8 7/8" 69 5/16"
Grille Panel
Door
Panel
A
B
C
Grille Panel
Door
Panel
A
B
C
Door
1/4" Framed Panel
Supplied Handles
Trim
Door
1/4" Backer Panel
.10" Spacer Panel
Supplied Handles
Trim
3/4" Overlay Panel