GE ZV950SDSS - Manual (Page 9)

9
1 INSTALL FRAMING
FOR HOOD SUPPORT
IMPORTANT: Framing must be capable
of supporting 100 lbs.
Installation Instructions
,IGU\ZDOOLVSUHVHQWPDUNWKHVFUHZKROHORFDWLRQVIRUWKH
WRSPRXQWLQJEUDFNHWV5HPRYHWKHWHPSODWH
‡&XWDZD\HQRXJKGU\ZDOOWRH[SRVHYHUWLFDOVWXGVDWWKH
EUDFNHWORFDWLRQLQGLFDWHGRQWKHWHPSODWH
‡,QVWDOODKRUL]RQWDOVXSSRUWDWOHDVW[EHWZHHQWZR
ZDOOVWXGVDWWKHWRSEUDFNHWLQVWDOODWLRQORFDWLRQ. The
KRUL]RQWDOVXSSRUWPXVWEHÀXVKZLWKWKHURRPVLGHRI
the studs. Use cleats behind both sides of the support
to secure the support to wall studs.
‡5HLQVWDOOGU\ZDOO
Centerline of
Installation
Space
8" Min. Opening for Ductwork
View From Rear
Cleats
1" x 6" Min.
Mounting
Support
2 INSTALL MOUNTING BRACKETS
This vent hood must be secured to the horizontal support or
wall studs.
‡:LWKWKHWHPSODWHWDSHGLQSODFHXVHDSXQFKWRPDUN
all mounting screw locations.
‡'ULOOSLORWKROHVDWWKHSXQFKHGORFDWLRQV
‡5HPRYHWKHWHPSODWH
‡7KHVXSSRUWEUDFNHWKROHVPXVWHQWHUVWXGVRUWKH
horizontal support.
Note: 6FUHZV´$µDQG´%µ
DUHSUHDVVHPEOHGRQWR
WKHEUDFNHWV'RQRW
remove these screws.
Screws
“B”
Screws
“A”
‡6HFXUHWKHPRXQWLQJEUDFNHWVWRWKHZDOOVWXGVZLWK
wood screws provided.