GE ZBD9900RII User Manual

Installation instructions, Built-in dishwasher, Stop sign before you begin

Advertising
background image

Installation Instructions

Built-In Dishwasher

If you have questions, call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com.

In Canada, please call 1.800.561.3344 or visit www.geappliances.ca

Stop Sign

BEFORE YOU BEGIN

Read these instructions completely and

carefully.

IMPORTANT –

Observe all governing codes and

ordinances.
Note to Installer – Be sure to leave these instructions for the

consumer’s and local inspector’s use.

Note to Consumer – Keep these instructions with your

Owner’s Manual for future reference.

Skill Level – Installation of this dishwasher requires

basic mechanical, electrical and plumbing skills. Proper

installation is the responsibility of the installer. Product

failure due to improper installation is not covered under

the GE Appliance Warranty. See warranty information.

Completion Time – 1 to 3 Hours. New installations require

more time than replacement installations.

IMPORTANT –

The dishwasher MUST be installed

to allow for future removal from the enclosure if service is

required.

If you received a damaged dishwasher, you should

immediately contact your dealer or builder.

Optional Accessories – See the Owner’s Manual for available

custom panel kits.

FOR YOUR SAFETY

Read and observe all CAUTIONS and WARNINGS shown

throughout these instructions. While performing

installations described in this booklet, gloves, safety glasses

or goggles should be worn.

READ CAREFULLY.

KEEP THESE INSTRUCTIONS.

31-30264 09/23/10 GE

Advertising
Table of contents