GE ZDBI240WII - Manual (Page 8)

Controls and Features
Beverage Center
Interior light
and light pad The interior light makes it easy to view your
beverage labels and enhances the display
of your collection. When the pad is depressed and the word
ON is displayed, the light will remain on for
one hour before automatically turning off.
When the pad is depressed and the word
OFF is displayed, the light will come on only
when the door is opened. For best viewing,
do not store a bottle on the top shelf
directly under the light. Remember to turn
off the light when it is no longer needed.
Temperature
control The operating temperatures of the
beverage center range from 40°F to 65°F.
Do not install the beverage center where
the temperature will go below 55°F or
above 90°F.
The temperature display shows the actual
temperature of the beverage center. The
actual temperature may vary slightly from
the set temperature based on factors such
as door openings, amount of beverages
and room temperature. After making
adjustments, allow 12 to 24 hours for the
beverage center to reach the temperature
you have set and before making any
further adjustments. The factory setting
is 45°F.
To change the temperature settings,
press the + and – pads until you reach
the desired set temperature. After several
seconds, the display will return to the actual
temperature. The actual temperature will be
displayed while the unit moves toward the
set temperature.
Allow 12 to 24 hours for the beverage
center to reach the temperature you have
set and before making any adjustments
to the initial setting.
8
Child control
lockout This child control lockout feature prevents
unwanted changes to your temperature
settings. After the desired temperature is set, the
temperature can be locked. To lock, press
both the + and – pads at the same time for
five seconds. To unlock, press both + and –
pads for five seconds.