GE ZFSB25DXSS - Manual (Page 15)

15
Refrigerator
doors
The refrigerator doors may feel different than the
ones you are used to. The special door opening/
closing feature makes sure the doors close all the
way and are securely sealed.
When opening and closing the door you will
notice a stop position. If the door is opened past
this stop point, the door will remain open to allow
you to load and unload food more easily. When
the door is only partially open,
it will automatically close.
The resistance you feel at the stop position will be
reduced as the door is loaded with food.
When the door is only partially open,
it will automatically close.
Beyond this stop the door will stay open.
Additional Features
Stainless Steel Refrigerator
To remove the base
grille, open the
doors, remove the
screw at each end
of the base grille
and then pull the
grille straight out.
If doors are uneven, adjust the refrigerator door.
1 Using a 7/16” socket wrench, turn the door
adjusting screw to the right to raise the door,
to the left to lower it. (A nylon plug, imbedded
in the threads of the pin, prevents the pin from
turning unless a wrench is used.)
2 After one or two turns of the wrench, open
and close the refrigerator door and check the
alignment at the top of the doors.
Door
alignment
Raise
7/16” Socket Wrench