GE 99001 GE Bluetooth Portable Stereo Transmitter - Manual (Page 3)

3
Using the Product
Thank you or choosing the GE 99001 Portable Stereo
Transmitter. This device supports the A2DP Bluetooth
®
profi le which provides users with the ability to stream
high quality audio via Bluetooth
® wireless technology
from any stereo device that has a 3.5mm headphone
jack or line output.
Charging
• Charge the unit for a minimum of 12 hours before
fi rst use. Use the enclosed USB charging cable or
the AC Adapter to fully charge the transmitter.
• The red LED indicator will stay on constantly when
charging.
• The transmitter’s red LED charging indicator will shut
off automatically when the battery is fully charged.
• The red LED indicator will start to fl ash when the
power is low. Charge the transmitter when you see
the LED low power indicator fl ashing.
Connecting the transmitter to an audio source
1. Use the 3.5mm stereo patch cable that came with
the transmitter to connect from the line input of the
transmitter to the headphone or line output jack on
your portable audio device.
2. Turn on the audio device as you normally would
to
play
3. Slide the power switch located on the top of the
GE 99001 transmitter to the on position.