AT&T Trimline 265 - Manual (Page 13)

10
INSTALLATION
Telephone Installation
Wall-Mount Installation
1. Make sure mounting
adapter is attached to
the bottom portion of
the set, so that the
front of the telephone
base will be about
parallel to the wall,
once it is mounted.
2. Plug one end of the
telephone line cord
into the telephone
line jack at the bottom
of the telephone base.
3. Thread the cord
through the channel
and out of the
mounting area as
shown.
4. Connect the other
end to a modular
telephone wall jack.
5. Mount the telephone on the wall as shown, then continue with the steps on page 12
for Handset Installation.
6. Remove handset cradle tab, rotate and replace to hold handset securely in place for
wall mounting (as shown in the diagrams below).
Line cord
Modular telephone
wall jack
Telephone
line jack