Replacing the hard drive duct – Apple iMac G5, 20-inch User Manual

Page 102

Advertising
background image

100 - iMac G5 (20-inch) Take Apart

Hard Drive Duct

Replacing the Hard Drive Duct

1.

Place the hard drive duct over the logic board so that the bottom of the duct fits into

the edge of the heat shield without any gaps.

2.

Replace the two screws.

Replacement Note: Although the screws are the same length, the head shape

differs. Replace the screw with the thicker head into the fully recessed screw hole.

3.

Replace the back cover.

Advertising