Boonton 4500B Peak Power Meter - Manual (Page 253)

Boonton 4500B RF Peak Power Analyzer
Remote Operation 5-53
MMEMory:SAVE:DISPlay
Description:
Make a *.BMP file of the display and write it to a file specified by the <‖asc‖> string. <"asc">
must contain the entire path, a filename without the extension, and be enclosed in quotes. If the
file already exists, it can only be overwritten if the command MEMory:OVERwrite ON has been
issued.
Syntax: MMEMory:SAVE:DISPlay <‖asc‖>
Argument: <‖asc‖> = ―C:\prog\dat\Pulse001‖ (example)
Valid Modes: All
MMEMory:STORe
Description: Store a waveform from a channel specified by the <asc1> string to a filename specified by the
<‖asc2‖> string. The <asc1> string is one of CH1, CH2, TRIG1, TRIG2, MEM1 or MEM2. The
<‖asc2‖> string must contain a filename with the entire path, without the extension, enclosed in
quotes. A space is required between the two arguments.
Syntax: MMEMory:STORe <asc1> sp <‖asc2‖>
Arguments: <asc1> = {CH1, CH2, TRIG1, TRIG2, MEM1, MEM2}
<‖asc2‖>> = ―C:\prog\dat\WFM001‖ (example)
<<asc1> sp <‖asc2‖>> = CH2 ―C:\prog\dat\WFM001‖ (example)
Valid Modes: All