Clinton Electronics CE-20PVMDVR User Manual - Manual (Page 22)

22
Playback view
To start playback you can decide between three different modes.
Normal playback
During live view press the playback/pause button to start normal playback.
Normal playback speed.
During the normal playback press or button to rewind or fast forward. By pressing in the
same direction again you raise the search speed (Speed: x2/ x4/ x8/ x16/ x32). Press button to
playback at normal speed.
During playback, press button to pause playback and press again to return to playback status.
After pressing Pause button you can search frame by frame, using or button. Press
button to playback at normal speed.
Press the stop button to stop playback and to return to live view.
Event list Playback
In order to open the search menu open
the main menu and select the menu item
SEARCH & PLAY.
The file view shows the date of recording and the number of files belonging to the recording. To
navigate press the direction button up or down and press button to playback. To return to
the selection mode press the stop button.
Shows the number of pages.
Record Mode:
Manual Record Schedule Record Motion Detection Record
Press the direction button right or left in order to show the first picture of the event.
Shows the time of the recording.
1
2
3
4
5
Playback using a Computer:
• Push down on the DVR’s SD Card to eject the card.
• Pull the card out and insert into your computer or SD Card reader.
• On your computer, select the SD Card folder. Search through the segmented files to find your desired clip.
• Open the clip in Windows Media Player to view.
*NOTE: The last file on the SD Card may be corrupted due to pulling it from the unit. This 3MB file will not
affect the desired recording as it is only the last few seconds before the SD Card was pulled.
*NOTE: The DVR uses an SDHC Card. You must have a computer or card reader capable of reading an SDHC
Card to view files on your computer.