CMP C2KX User Manual
Cable gland, Cable gland type c2kx type c2kx, For termination of cables with wire braid
INSTALLATION INSTRUCTIONS FOR
CMP CABLE GLAND TYPE C2KX
FOR TERMINATION OF CABLES WITH WIRE BRAID.
INCORPORATING EC DECLARATION OF CONFORMITY TO DIRECTIVE 94/9/EC
CM
P
Do
cu
m
en
tN
o.
FI
42
5
Is
su
e
3
01
/1
3
0518
Notified Body: Sira Certification Service, Rake Lane, Chester CH4 9JN, England.
I, the undersigned, hereby declare that the equipment referred to herein conforms to the ATEX Directive 94/9/EC and the following standards:-
EN60079-0:2006, EN60079-1:2007, EN60079-7:2007, BS 6121:1989, EN50262:1998 (Amd 2001), EN61241-0:2004, EN61241-1:2004
Dr Geof Mood - Technical Director - (Authorised Person)
DUBAI
• HOUSTON • NEWCASTLE • SINGAPORE • SHANGHAI • PUSAN • PERTH
www.cmp-products.com
Logo’s shown for illustration purposes only. Please check certification for details
CABLE GLAND
CABLE GLAND
TYPE C2KX
TYPE C2KX
NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. # Other thread forms are available.
Cable
Connect
or Size
Available Entry Threads
Thread Length
Cable
Bedding
Diameter
Overall Cable
Diameter
Braid Wire
Diameter
Across
Flats
Across
Flats
Protrusion
Length
Ordering Reference
(NP Brass NPT)
PVC Shroud
Reference *
Connector
Weight
(Ozs)
Standard
Option
Metric NPT
NPT Actual NPT Min Metric
Max
Min
Max
Min
Max
Min
Max
Max
Max
20S/16
1/2"
3/4"
M20
0.630
0.591
0.461
0.240
0.453
0.006
0.020
0.945
1.021
2.303
20S16C2KX1RA531
PVC06
4.65
20S
1/2"
3/4"
M20
0.630
0.591
0.461
0.374
0.626
0.006
0.020
0.945
1.021
2.303
20SC2KX1RA531
PVC06
4.65
20
1/2"
3/4"
M20
0.630
0.591
0.551
0.492
0.823
0.008
0.020
1.201
1.112
2.382
20C2KX1RA531
PVC06
6.84
25S
3/4"
1
M25
0.669
0.591
0.787
0.551
0.866
0.008
0.024
1.476
1.594
2.657
25SC2KX1RA532
PVC09
10.78
25
3/4"
1"
M25
0.669
0.591
0.787
0.717
1.031
0.008
0.024
1.476
1.594
2.657
25C2KX1RA531
PVC09
10.78
32
1"
1 1/4"
M32
0.787
0.591
1.035
0.933
1.335
0.008
0.024
1.811
2.008
2.736
32C2KX1RA532
PVC11
16.49
40
1 1/4" 1 1/2"
M40
0.787
0.591
1.268
1.098
1.591
0.008
0.031
2.165
1.956
3.071
40C2KX1RA534
PVC15
23.89
50S
1 1/2"
2"
M50
0.787
0.591
1.504
1.386
1.839
0.008
0.031
2.362
2.338
2.972
50SC2KX1RA535
PVC18
26.43
50
2"
2 1/2"
M50
0.906
0.591
1.736
1.591
2.091
0.012
0.031
2.756
2.827
3.169
50C2KX1RA536
PVC21
36.79
63S
2"
2 1/2"
M63
0.906
0.591
1.969
1.795
2.339
0.012
0.031
2.953
3.189
3.602
63SC2KX1RA536
PVC23
37.85
63
2 1/2"
3"
M63
0.984
0.591
2.205
2.150
2.594
0.012
0.031
3.150
3.402
3.622
63C2KX1RA537
PVC25
45.11
75S
2 1/2"
3"
M75
0.984
0.591
2.441
2.323
2.839
0.012
0.031
3.504
3.784
3.898
75SC2KX1RA537
PVC28
65.55
75
3"
3 1/2"
M75
1.417
0.591
2.677
2.262
3.091
0.012
0.031
3.898
4.209
4.016
75C2KX1RA538
PVC30
89.87
90
3 1/2"
4"
M90
1.417
0.591
3.150
3.000
3.559
0.016
0.031
4.488
4.847
4.724
90C2KX1RA539
PVC32
128.63
Dimensions are displayed in inches unless otherwise stated
Glasshouse Street • St. Peters • Newcastle upon Tyne • NE6 1BS
Tel: +44 191 265 7411 • Fax: +44 191 265 0581
E-Mail: [email protected] • Web: www.cmp-products.com
LISTED MARINE
SHIPBOARD CABLE
FITTING
31YM
29NX
TECHNICAL DATA
CABLE GLAND TYPE
: C2KX
INGRESS PROTECTION
: IP66, IP67, IP68
PROCESS CONTROL SYSTEM
: BS EN ISO 9001
: ISO/IEC 80079-34:2011
HAZARDOUS AREA CLASSIFICATION
ATEX CERTIFICATION No
: SIRA 06ATEX1097X
ATEX CERTIFICATION CODE
:
II 2 GD Ex e II / Ex tD A21 IP66
IEC Ex CERTIFICATION No
: IEC Ex SIR.06.0042X
IEC Ex CERTIFICATION CODE
: Ex e II / Ex tD A21 IP66
CSA CERTIFICATION No
: 2367109
CSA CERTIFICATION CODE
: Ex e II and Class I, Zone 1, AEx e II
UL CERTIFICATION FILE
: E200163, E256367
UL CERTIFICATION CODE
: Class I, Zone I AEx e II; TYPE 4X, OIL RES II
INSTALLATION INSTRUCTIONS
Installation should only be performed by a competent person using the correct tools. Spanners should be used for tightening. Read all instructions
before beginning installation.
SPECIAL CONDITIONS FOR SAFE USE
For ATEX & IEC Ex certification:
1. The cable gland ranges shall only be used where temperatures at the point of entry is between -60°C and +130°C.
2. C2KX cable glands are only suitable for fixed installations. Cables must be effectivelu clamped to prevent twisting and pulling
3. The entry component threads may need additional sealing to maintain the ingress protection rating as applicable to the associated equipment to
which it is attached
For American Ex certification:
1. C2KX cable glands are only suitable for fixed installations. Cables must be effectively clamped to prevent twisting and pulling.
2. According to C.E.C. and the N.E.C. wiring method for the types of cables that can be used in Class I, Zone 1and 2 Classified Areas, according
to 60079-14 installation wiring method restrictions.
3. Shipboard Cables are for use on Marine Platform and/or shipboards only and are subject to local authorities having jurisdiction on the installation.
ACCESSORIES
The following accessories are available from CMP Products, as optional extras, to assist with fixing, sealing and earthing :-
Locknut | Earth Tag | Serrated Washer | Entry Thread (I.P.) Sealing Washer | Shroud *