Eddie Motorsports MS107-50 - Manual (Page 6)

6
Install Alternator:
1. Install alternator using one M8 x 25mm and one M10 x 80mm cap screws and washers
with anti seize.

Tighten shoulder bolt and all cap screws on a/c pump and alt at this time.
Install Water Pump Pulley:
1. Install water pump pulley using four 5/16-24 x 1/2” cap screws with red thread locker.
Install Crank Pulley:
1. Install crank pulley using three 3/8-16 x 1” cap screws and Belleville washers as shown
with thread locker.