Install main bracket, Install power steering pump with pulley – Eddie Motorsports MS107-55 User Manual
Page 4
Advertising
4. Install three remaining (2.69”) spacer posts.
Note: Tighten all spacer posts and two cap screws at this time.
Install Main Bracket:
1. Install main bracket using four M8 x 25mm cap screws and washers with anti seize.
Finger tighten.
Install Power Steering Pump with Pulley:
1. Install power steering pump using two 5/16-18 x 3” cap screws and lock washers with
anti seize. Tighten firmly.
Advertising