Eddie Motorsports MS107-55 User Manual
Page 8
Install Compressor Manifold: Do not perform this step until you are
ready to install AC lines and charge your system!
1. Remove the plate on the top of compressor body. The compressor is Nitrogen charged to
insure lubrication of all components during transport. You will hear the gas escaping
when you loosen the fasteners.
2. Install manifold as shown using two M8 x 25mm cap screws with anti seize.
WARNING: Do not connect power to the AC clutch wire without first connecting
hoses and charging the system. Please follow all of the enclosed instructions for
charging your system. Serious damage to your compressor can occur and the
warranty will be voided.
EDDIE MOTORSPORTS IS NOT RESPONSIBLE FOR CUSTOMER APPLICATIONS
THAT ARE OUTSIDE THE NORMAL INTENDED USE OF OUR PRODUCTS,
INCLUDING SPECIFIC MODEL AND YEAR APPLICATIONS, ENGINES EQUIPPED
WITH SUPER CHARGERS, AND LATE MODEL EMISSIONS EQUIPPED VEHICLES.
PLEASE CALL WITH ANY QUESTIONS: 888-813-1293