EOTech MIPIM (AN/PEQ-16B) - Mini Integrated Pointer Illuminator Module - Manual (Page 23)

1-11
1.9 FEATURES AND CONTROLS - Continued
Table 1-3 List of Features and Controls
Key
Control/
Indicator
Function
1 Tri-Function Lens
Cap
Serves the following three functions when
installed over the Tri-Laser Assembly:
a. Uses an Illuminator Diffuser to
spread the laser energy from the IR
Illuminator over an angle of
approximately 180 degrees,
allowing for illumination of a wider
area;
b. Prevents emission from the Visible
Aim Laser; and
c. Uses a Neutral Density Filter to
reduce scatter from the IR Aim
Laser.
2 IR Illuminator
Focus Knob
Used to vary the IR illumination beam
spread from flood to spot, based on the
range and size of the area to be
illuminated.
3 IR Illuminator Used with night vision devices to provide
variable focused IR illumination of the
intended target area.
4 Visible Aim Laser Used to provide a precision aim point or
to positively identify targets at close range
during the day or night, without the need
of night vision devices. May also be used
for boresighting the MIPIM during daylight
hours.