Equus 3660 - Hand Vacuum Pump & Brake Bleeding Kit - Manual (Page 19)

3660 17
1. Attach the 3-1/2" (9 cm) length of tubing to the bottom fitting of
the reservoir jar lid.
2. Tighten the reservoir jar lid onto the reservoir jar securely.
3. Connect the 1-1/2" (4cm) or the 24 inch (61cm) length of tubing,
whichever is better suited for your application, between the
vacuum pump and the reservoir jar lid at the fitting marked
"PUMP".
NOTE: To reduce the possibility of drawing fluid into the vacuum
pump body, make sure that the vacuum pump is only connected to
the tubing that goes to the jar lid fitting marked "PUMP".
4. Attach a 24 inch (61cm) length of tubing to the remaining fitting
on the reservoir jar lid.
JAR CAP
JAR LID
24 in (21cm) TUBING
8oz ( 240ml)
RESERVOIR
3.5" (9cm) TUBING
GAUGE HEAD
PUMP
HOSE ADAPTERS
TEE FITTING
PLUG
11/2 in (4cm)
tubing
Figure 10. Vacuum Pump Brake Bleeding
and Fluid Evacuation Accessories