Fantasea Line Nano Adaptor Kit - Manual (Page 4)

Nano, Remora and Sea & Sea Strobes FO 20090618
4
c) Follow the instructions on your Nano, Remora or Sea & Sea strobe manual in
order to synchronize your camera with the external strobe. Please note that
different digital cameras have different pre‐flash and flash characteristics,
which are compatible with different strobe modes. It is always a good idea to
test the synchronization when photographing opposite a mirror. In this case
both flash units (the camera and the slave) should be illuminated when
viewing the results of the test shot taken.
www.fantasea.com/contact For further information please contact us at
. www.fantasea.com r website or visit ou
Note:
In some cases, after using the fiber optic cable frequently or for a long period, you
might encounter a decrease in performance. You can easily solve this problem by
cutting 1 cm/0.3 inch off the fiber optic cable's ends, using a sharp tool and
performing a very straight angled cut. This way you remove any worn ends, and
expose a new portion of the cable.