AEG BS9304001 - Manual (Page 15)

4. Use to set the Duration for cooking time or End Time for switch-off time.
The first steam shows after approximately 2 minutes. When the oven reaches set tem-
perature an acoustic signal sounds.
Another acoustic signal sounds at the end of cooking time or when water finishes.
5. Deactivate the appliance.
After the oven cools down, soak up all remaining water from the steam generator with the
Sponge and clean if it is necessary with some vinegar.
Let the oven dry fully with the door open.
Heat-up indicator
When you activate an oven function, the bar on the display comes on. The bar shows that
the temperature increases.
Fast Heat Up indicator
This function decreases the heat-up time. To activate the function hold for 3 seconds.
You will see the heat-up indicator alternates.
Residual heat indicator
When you deactivate the appliance, the display shows the residual heat. You can use the
heat to keep the food warm.
Energy saving
The appliance has same features that help you save energy during everyday cooking:
• Residual heat:
– the oven function or programme operates: the heating elements are deactivated 10%
time earlier (the lamp and fan continue to operate). The condition: the cooking time is
longer then 30 minutes or you use the clock functions ( Duration , End Time ).
– the oven is off: you can use the heat to keep the food warm. The display shows the
remaining temperature, the bars show the decreasing temperature.
• Oven lamp off - touch and hold for 3 seconds to deactivate the oven lamp during
cooking;
• Eco functions - refer to "Oven function".
CLOCK FUNCTIONS
Timer functions
Symbol Function Description
Minute Minder
To set a countdown (max 2 hours 30 minutes). This function has
no effect on the operation of the appliance. You can also acti-
vate it in off state. Use to activate the function. Use shuttle
to set the minutes and OK to start.
Duration
To set how long the appliance has to be in operation (max. 23 h
59 min).
Clock functions 15