AEG BS9304001 - Manual (Page 17)

The Heat + Hold function operates for 30 minutes.
The Heat + Hold function stays on if you change the oven functions.
Extra Time
The Extra Time makes the oven function continue after the Duration ends.
• Applicable for all oven functions with Duration or Weight Automatic .
• Not applicable for oven functions with Core Temperature Sensor.
Activating the function:
1. When the cooking time ends, an acoustic signal sounds. Press any sensor field.
2. The display shows the message for Extra Time for five minutes.
3. Press to activate (or to cancel).
4. Set Extra Time period. Press OK to confirm.
AUTOMATIC PROGRAMMES
WARNING!
Refer to "Safety information" chapter.
Assisted Cooking with Recipe Automatic
This appliance has a set of recipes you can use. Recipes are fixed and you cannot change
them.
Activating the function:
1. Activate the appliance.
2. Select Assisted Cooking menu. Press OK to confirm.
3. Select the category and dish. Press OK to confirm.
4. Select the Recipe Automatic . Press OK to confirm.
When you use Manual function the appliance uses automatic settings. You can change
them as with other functions.
Assisted Cooking with Weight Automatic
This function automatically calculates the roasting time. To use it you need to input food
weight.
Activating the function:
1. Activate the appliance.
2. Select Assisted Cooking . Press OK to confirm.
3. Select the category and dish. Press OK to confirm.
4. Select the Weight Automatic . Press OK to confirm.
5. Use the shuttle to set the food weight. Press OK to confirm.
The automatic program starts. You can change the weight at any time. Use the shuttle to
change the weight. When time ends, an acoustic signal sounds. Press a sensor field to deac-
tivate the signal.
Automatic programmes 17