Auxiliary device (optional), Epg screen operation, Displaying the menu screen – Alpine VPA-B222R User Manual
Page 31: Operating auxiliary devices (optional)
30
-EN
01GB05VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Press the joystick up or down to select DVB-T, 
then press 
/
/ENTER.
3
Press
/
/ENTER to switch the channel mode.
Channel up/down
Favorite Channel up/down
4
Press
or
to seek for a channel downward
or upward respectively.
5
Press and hold
for at least 2 seconds to switch a
source of digital TV unit.
EPG Screen Operation
1
Press
/MENU/FUNC..
The EPG screen is displayed.
2
Press the joystick up or down to select the desired 
item for adjusting.
3
Press the joystick left or right to adjust the selected 
item, then press and hold 
/
/ENTER for at least 2
seconds.
Automatic Memory of Channel Presets
1
Press and hold
/MENU/FUNC. for at least 2
seconds.
The FUNCTION screen is displayed.
2
Press the joystick up or down to select A. MEMO, 
then press 
/
/ENTER.
The auto preset operation starts.
Displaying the Menu Screen
The menu screen for a digital TV unit is displayed.
1
Press and hold
/MENU/FUNC. for at least 2
seconds.
The FUNCTION screen is displayed.
2
Press the joystick up or down to select MENU, 
then press and hold 
/
/ENTER for at least 2
seconds.
Operating Auxiliary Devices (Optional)
To operate devices connected to the AUX terminals of VPA-B222R, 
follow the procedure described below.
• If you try to activate an auxiliary device while driving, the display
will show the warning-PICTURE OFF FOR YOUR SAFETY.
1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Press the joystick up or down to select the AUX 
mode, then press 
/
/ENTER.
The external input screen is displayed.
• AUX-1 to AUX are displayed if AUX IN set to ON in “Setting the
AUX mode” (page 18), or the name which is given as the source 
name in “Naming External Devices” on page 18 is displayed.
• AUX-3 is displayed when the optional expansion box (VPE-S431) is
connected.
• When the Versatile Link Terminal (KCA-410C) is connected, external
input to KCA-410C is unavailable. However, when IN-INT MUTE is 
set to off, the sound of a device connected to the external input of 
KCA-410C can be interrupted. (See "Setting the External Device 
Interrupt Mode" page 19.)
Auxiliary Device 
(Optional)
WARNING
It is dangerous for the driver to watch the TV/Video 
while driving the vehicle. The driver may be distracted 
from looking ahead and an accident could occur.
Install the VPA-B222R correctly so that the driver 
cannot watch TV/Video unless the vehicle is stopped 
and the emergency brake is applied. 
If the VPA-B222R is not installed correctly, the driver 
will be able to watch the TV/Video while driving the 
vehicle and may be distracted from looking ahead and 
cause an accident. The driver or other people could 
be severely injured.
01GB00VPAB222R.book Page 30 Monday, January 23, 2006 4:24 AM