Alpine VPA-B222R - Manual (Page 34)

33
-EN
01GB05VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
1
Check that Defeat mode is off (page 12).
2
Press and hold TA/RTN/SETUP for at least 2
seconds.
The SETUP screen is displayed.
3
Press the joystick up or down to select AP SETUP,
then press the joystick right.
The AP SETUP screen is displayed.
4
Press the joystick up or down to select MX, then
press joystick left or right to select ON.
5
Press the joystick up or down to select
MX SETUP, then press the joystick right.
6
Press the joystick up or down to select the media
that is being played back. Then press the joystick
left or right to set the desired MX mode.
MX CD (OFF, CD 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
MX COMPM (OFF, CMPM 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX FM (OFF, FM 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE 1 to 2)
The dialog portion of the video is reproduced more clearly.
MX AUX 1 to 3 (OFF, CMPM, MOVIE, MUSIC)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that
corresponds to the media connected.
7
Press TA/RTN/SETUP to return to the previous
screen.
• The contents of MX set here is reflected in PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• MX mode does not function when MX is ON for MW, LW radio.
• MX COMPM is applied for MP3/WMA, MMD, iPod.
• MX mode can only be set for media currently playing back.
• AUX3 can be set only when the optional expansion box VPE-S431 is
connected.
X-OVER Adjustment
1
Check that Defeat mode is off (page 12).
2
Press and hold TA/RTN/SETUP for at least 2
seconds.
The SETUP screen is displayed.
3
Press the joystick up or down to select AP SETUP,
then press the joystick right.
The AP SETUP screen is displayed.
4
Press the joystick up or down to select
X-OVER.
5
Press the joystick left or right to select L/R or L+R.
6
Press the joystick up or down to select X-OVER
SETUP, then press the joystick right.
7
Press the joystick up or down to select the desired
speaker, then press the joystick right.
8
Press the joystick up or down to select the desired
item, then press the joystick left or right to adjust
the crossover.
To adjust other channels, repeat steps 7 and 8.
9
Press TA/RTN/SETUP to return to the previous
screen.
• When the speaker is set to the “OFF” mode, the X-OVER for that
speaker cannot be set. Refer to “Setting the Speakers” (page 32).
• Check the playback frequencies of the connected speakers before
adjusting.
• In order to protect the speakers, there is no OFF setting for the
subwoofer low pass filter (the slope remains the same).
• The H.P.F. filter cannot be set to OFF (slope OFF) if TW (tweeter) is
selected for FRONT1.
(MUSIC)
This disk contains a large quantity of data, such as a music clip.
MX uses this data to reproduce the sound accurately.
FREQUENCY: Adjust the H.P.F. or L.P.F. cutoff frequency.
The adjustable bands differ according to the
channel (speaker).
LEVEL: Adjust the H.P.F. or L.P.F. level.
Adjustable level: -13 to 0
SLOPE: Adjust the H.P.F. or L.P.F. slope.
Adjustable slope: OFF/-6/-12/-18/-24/-30
01GB00VPAB222R.book Page 33 Monday, January 23, 2006 4:24 AM