Rocky Mountain Radar RMR-C475 - Manual (Page 6)

Alarms: A separate alert tone will sound for each
band of Radar encountered with frequency band
displayed X, K, Ka, or LASER. The signal strength
indicators are 5 arrows, the stronger the signal the
more arrows will display. Tone frequency will
increase as signal strength becomes stronger.
Signal Strength: Signal Strength will be first
indicated by the illumination of the LCD of the
band detected, then followed by 1 thru 5 arrows.
When all 5 arrows are illuminated the signal is
strongest.
VG-2: VG-2 detection is indicated with a separate
alarm along with the VG2 display.
The C475 is always undetectable by VG-2/VG3.
Diagnostics: The RMR-C475 has a full internal
automatic diagnostic system. If the power light
goes off and remains off, check the 2-amp fuse in
the power cord by unscrewing the silver tip and
removing the fuse. If the fuse is good (wire inside
the fuse unbroken), return the unit for service.
5