A&D ML-50 User Manual
Page 38
36
MS-70 / MX-50 / MF-50 / ML-50
Select an Analysis Mode
5. Press
the
SELECT
key to select a symbol, it
will blink. Select
U-t
of the timer mode with
the
↓
or
↑
key. (Press these keys to select it)
Set the Heating Pattern
6. Select
drying
temperature with the
SELECT
key.
Select ramp drying
of the heating pattern
with the
PROGRAM
key.
Set the Final Drying Temperature
7. Set 160°C with the
↓
or
↑
key.
Set the Ramp Time
8. Set 5.0 minutes with the
↓
or
↑
key.
Set the Analysis Time
9. Set 10.0 minutes with the
↓
or
↑
key.
Set a Measurement Unit
10. Select a measurement unit with the
SELECT
key. Select moisture content (based on a wet
sample ) with the
↓
or
↑
key.
Set the Minimum Scale Value of the % Display
11. Select the % display with the
SELECT
key.
Select 0.01 [%] with the
↓
or
↑
key.
Set the Minimum Scale Value of the Gram Display
12. Select gram display with the
SELECT
key.
Select 0.001 [g] with the
↓
or
↑
key.
Store the Parameters and Finish the Operation
13. Press the
ENTER
key to store the new parameters
of the measurement program to program number 4.
Pressing the key, the weighing mode is
automatically displayed. When PROG 4 is recalled,
the settings can be used.
To cancel the new parameters and return to the
weighing mode, press the
RESET
key.
"U"-"t
0.000
g
Analysis mode
1
0.000
g
"1"0"5°C
Ramp Time
"5."0 min
2
0
"%
"M"O"I"S"T
"/"W
Measurement unit
"0."0"1
%
Minimum scale
value of % display
"0."0"0"1
g
Minimum scale
value of gram
display
0.000
g
160°C
10.0 min
"1"0."0 min
Analysis time
0.000
g
"1"6"0°C
Final drying temperature
Ramp drying
Gram display of
weighing mode