Sper Scientific 100000 Micro Recording Card - Manual

Micro Recording Card 100000 Instructions
RECORDING MESSAGES
You can record multiple messages up to the total memory time of 90 seconds.
To record at the beginning of the memory:
1. Slide the PLAY / RECORD (2) slide switch to the REC position.
2. Press the REWIND (1) button once.
3. Press and release the ON / OFF (4) button.
4. The LED RECORDING INDICATOR (3) lights during recording.
5. Speak into the front of the recorder from approximately 3" away.
6. When the 90 seconds of memory are used, the LED will go off.
7. To stop recording, press the ON / OFF (4) button again.
8. You may make additional recordings until the memory is full.
To record at a specific location in the memory:
This allows you to find the end of your current messages, or to replace an old
message with a new one.
• Slide the PLAY / RECORD (2) slide switch to the PLAY position.
• Press the REWIND (1) button once.
• Press and release the ON / OFF (4) button to play the first message.
• Playback will stop automatically at the end of the message.
• Continue playing subsequently recorded messages by pressing the
ON / OFF (4) button until you have reached the desired location.
• Slide the PLAY / RECORD (2) slide switch to the REC position.
• Press and release the ON / OFF (4) button to begin recording.
• To stop recording, press the ON / OFF (4) button again.
SPER
SCIENTIFIC
LTD.
. .
REW PLAY REC
1 2 3
6
4
5
1 Rewind Button
2 Play / Record Slide Switch
3 Recording Indicator
4 On/Off Button
5 Speaker
6 Battery compartment (back)