SUPERTOOTH BUDDY - Manual (Page 8)

8
Multi-Point Pairing Procedure:
1. Turn off the handsfree kit by pressing and holding the On/Off
(8) button until the LED flashes red.
2. Pair the additional phone as explained in “Pairing to your
Bluetooth Mobile Phone on section E”. This phone will now
be the primary phone.
3. Connect the 1st phone paired manually or turn the kit Off then
On to connect both phones automatically.
Using Multi-Point:
Refer to “BASIC OPERATION on section G”.
Notes:
• Voice dial and re-dial will be done using the primary phone
only.
• You can accept or reject calls from any of the two phones.
When you already have an ongoing call on the 1st phone, if you
receive a call on the 2nd phone, you will hear a special ringtone on the
handsfree kit while the ongoing communication continues.
To end the 1st phone call and accept the 2nd phone call:
Short press the MFB (6) button will automatically end the 1st phone
call and accept the 2nd phone call (audio will automatically be
heard through the handsfree kit).
Note: Call waiting is not available if two phones are connected
(MultiPoint).
c. Switching Connections Between Paired Phones
The SUPERTOOTH BUDDY always maintains a maximum of 8
phones in its memory. An additional pairing will automatically delete
the phone that has not been used for the longest time. This phone
needs to be paired again before it can be used.
You can easily switch to any of the paired phones by:
1. Disconnecting one of the 2 connected phones using the “Active
devices” in the Bluetooth menu of that phone.
2. Connecting the handsfree kit to the desired phone by using the
“Paired devices” in the Bluetooth menu of that phone.
Note: Reconnection to a paired phone can also be done by pressing
the MFB (6) button. However, the SUPERTOOTH BUDDY will attempt
to connect to the last used phone only. Therefore, it is recommended to
connect to another paired phone using the phone menu.