Allied Telesis CG-WLBARGS - Manual (Page 48)

WLBARGS Manual
46 47 PB 46 46 47 46 47 46 47
If you would like to use AP (Access Point) function, please use the switch but-
ton in the bottom of the product. The operations are as the below:
(1) Cut off the power.
(2) Switch AP/Router to the left (AP side).
AP R outer
(3) Plug in the product.
(4) Now the product is in AP mode. Open browser to access setting page and
enter [192.168.1.220] into the address bar, then press [Enter].
** Warrning **
This is a special application. In AP mode, the product stops to generate IP,
WAN port doesn’t function and LAN port also becomes a normal hub, so
users are recommended to keep its router function.
AP/Router Switching
7