Telenav for Cincinnati Bell Supported Devices: v5.2 for Windows Mobile smartphones Users Guide - Manual (Page 8)

6. Launching TeleNav GPS Navigator
1. To launch TeleNav, find the TeleNav icon on the device’s
Program menu and select it.
2. After starting TeleNav, the splash screen appears for a few
seconds.
Login
The next screen will collect your login information. Your phone number
is automatically generated. Your phone number MUST be the same
as your carrier phone number beginning with area code so that when
you call the Voice Address Input System, you will not need to type it in.
Correct the number if it is not accurate.
Type in your first and last name and click Login.
You may be prompted to type in your 4-digit PIN. This information
should have been sent to you as an SMS after you called in to
purchase a TeleNav GPS Navigator account.
NOTE: After login, you may also see important messages from
TeleNav regarding upgrades, scheduled downtime, pending account
expiration, etc.
When the device reaches the TeleNav servers with a valid phone
number and PIN, the device will be registered to use TeleNav and will
only present the splash screen and Warning screens in the future.
Visiting
www.telenav.com and changing the PIN will require you to
repeat the above registration process.
© TELENAV, INC. 2003-2008 PAGE 8 OF 55