Turbo Action 70001B CHEETAH SCS Shifter - Manual (Page 3)

Part #70001B 3 7/89,9/98,2/01,6/05,6/06,3/07
STEP #8: Adjust Pivot to fit in Shift Lever properly.
STEP #9: Before installing Hairspring Cotter, have someone sit in car and move shifter lever
through each gear while you check to see if shift lever on transmission is moving the
full distance.
CAUTION: You must use the Turbo Action Part #70032 Shift Lever and the Turbo Action
#70052A Case Bracket. No other brand lever or bracket will work properly for
gate alignment. Other brands will result in misalignment and cause the
transmission to fail.
STEP #10: Install Park/Neutral Switch per instructions included (page 5).
Note: If car is equipped with a working factory Park/Neutral Switch it will not be
necessary to hook up the Turbo Action Switch.
Transmission
Case
U-Clamp must fit over
groove in steel jacket
on the cable.
8
7
70052A
10
3
4
1
5
6
9
2
Item Description Qty.
1 Hex Nut 1/4-28 2
2 TF Case Bracket 1
3 Shim Block 1
4 Cable U-Clamp 1
5 Lock Washer 1/2 1
6 Hex Nut 1/2-13 1
7 Hairspring Cotter 1
8 TF Shift Lever 1
9 Pivot 1
10 Hex Head Bolt 1/2-13 x 1 1/4 1
Fig. #1
Installation Kit - #70220