Yetter 2000 Series Vertical Tillage Tool (V.T.T.) - Manual (Page 32)

32
OPERATION
COULTER BLADE DEPTH ADJUSTMENT
To change to the operating depth of the coulter blades, the adjustment is to be pinned in one of seven
holes. The top hole is for deep tillage and the bottom hole is for shallow tillage. Initially, use the 4
th
hole,
then adjust the bracket according to field conditions. Liquid ballast weight can be added with the use of the
2000-037 tank kit.
IMPORTANT: To prevent damage to the machine, when the adjustment bracket is moved to change blade
depth, the cylinder stops must be changed also.