Allied Telesis AT-2872SX - Manual (Page 35)

AT-2872SX ExpressCard Fast Ethernet Fiber Module Installation and User’s Guide
35
Note
A network device driver must be physically installed before the
Broadcom NetXtreme II Controller can be used with your Windows
operating system. There is no installation CD. You must download
the drivers.
Note
Allied Telesis recommends that you not perform hot insertions or hot
removal when the OS is up and running, We recommend that you
insert or remover the adapter only when the system is powered
down.
Using the
Installer
The Installer is a graphical interactive installation mode. To install the AT-
2872SX driver on a Windows Operating System, do the following:
1. When the Found New Hardware Wizard appears, click Cancel.
See Figure 8.
Figure 8. Found New Hardware Wizard Page