Installation instructions – Yetter 2967-097 TITAN Series Short U.N.T. CNH Residue Manager User Manual
Page 10
Advertising
10
INSTALLATION INSTRUCTIONS
STEP 3. Fill the hub and bearing assembly with general-purpose grease.
STEP 4.
Choose the hole in which to attach the R.M. wheel assemblies. Attach the R.M.
wheel/hub assemblies to the combo arm using 5/8” lock washers and hex nuts. Adjust the bearing
shield to top dead center, rotated slightly forward. Torque to 150 ft. lbs.
Advertising
This manual is related to the following products: