Yetter 2967-097 TITAN Series Short U.N.T. CNH Residue Manager - Manual (Page 9)

9
INSTALLATION INSTRUCTIONS
STEP 2. Attach the 2966-201 combo arm to the mount bracket on the left side using a 5/8” x 2”
bolt, 6000-335 bushing, 2967-639 adjustment plate and lock nut. On the right side use a 5/8” x 2”
bolt, 6000-335 bushing, flat washer and lock nut. Install the ½” x 2” bolt, 2967-622 spacer and lock
nut on the left side to secure the adjustment plate and insert the 2984-326 pin in the adjustment
holes and install the 2570-448 hairpin clip.