Yetter 2967-122 Floating Residue Manager User Manual
Page 5
5
MAINTENANCE
BEARING ASSEMBLY AND LUBRICATION
Practice Safety
Understand and practice safe service procedures before doing work. Follow ALL the
operating, maintenance and safety information in the equipment operator manual.
Clear the area of bystanders, especially small children, when performing any
maintenance or adjustments. Keep work area clean and dry. Use adequate lighting
for the job. Use only tools, jacks and hoists of sufficient capacity for the job.
Never lubricate, service, or adjust machine while it is moving. Keep hands, feet, and
clothing from power-driven moving and rotating parts. Disengage all power and
operate controls to relieve pressure. Lower equipment to the ground and stop the
engine. Remove the key. Wait for all moving parts to stop before servicing,
adjusting, repairing or unplugging.
Securely support any machine elements with blocks or safety stands that must be
raised for service work.
Keep all parts in good condition and properly installed. Fix damaged equipment
immediately. Replace worn or broken parts. Remove any buildup of grease, oil, or
debris.
Make sure all guards are in place and properly secured when maintenance work is
completed.
Assembly