Yetter 6000-006 Quick Response Shoe Assembly - 7200/7300 (MEII), 1700 (MEII Plus, MEII Pro) - Manual

6000-006
QUICK RESPONSE SHOE ASSEMBLY
INSTRUCTIONS ON 7200/7300 (MEII), 1700(MEII PLUS, MEII PRO)
ASSEMBLY INSTRUCTIONS
1. Remove gauge wheel arm assemblies from the row unit.
2. Remove the gauge wheel depth stop adjustment assembly.
3. Remove the rotary scrapers.
4. Remove the mounting studs from the scraper arm.
5. Drill two 13/32” holes in the scraper arm to accommodate the 3/8” x 2 ½” mounting bolts.
6. Check the seed opener blades for 2” of blade edge contact. Check your planter operator’s manual for
correct adjustments procedure. NOTE: this adjustment is critical for correct installation and
adjustment of the Quick Response Shoe.
7. Remove the R.H. seed opener disk blade.
8. Attach the 6000-251 arm to the planter unit using two 3/8” x 2-1/2” bolts. NOTE: do not assemble
scrapers at this time because the R.H. seed opener blade has been removed to determine the
number of shims needed to have proper clearance between the seed tube and the 6000-250 fertilizer
shoe.