Yetter 6150 Series Markers - Manual (Page 14)

14
MAINTENANCE
Lubrication Symbols
Lubricate with grease at hourly interval indicated on symbol.
Lubrication Intervals
IMPORTANT: The recommended service intervals are based on normal
conditions; severe or unusual conditions may require more frequent lubrication.
Perform each lubrication and service procedure at the beginning and end of
each season.
Clean grease fittings before using grease gun, to avoid injecting dirt and grit
into the bearing. Replace any lost or broken fittings immediately. If a fitting fails
to take grease, remove and clean thoroughly, replace fitting if necessary. Also
check for failure of adjoining parts.
BEARING REPLACEMENT INSTALLATION
1. When assembling the spoke wheels, bearing assembly and hubcap, be sure to
align the grease transfer hole in the spoke wheel with the groove in the hubcap
and hole in the hub to allow grease passage.
2. Install/assemble the wheels, hubs and caps.
3. Grease the wheel/hub/bearing assembly.