Aurora Electronics MAGNETEK PVI-3600-OUTD-UK-F-W - Manual (Page 18)

Installation and Operator’s Manual Page 18 of 63
(PVI-3600-OUTD-UK-F-W Rev.: 1.0)
3.3 Choosing Installation Location
The location for the installation of AURORA should be selected in accordance to
the following recommendations:
AURORA should be placed at a suitable height from ground to allow easy
reading of the front display and the status LEDs.
Leave enough room around the unit to allow easy installation and
maintenance.
Choose a location sheltered from sun radiation and able to provide some
ventilation. Avoid locations where air cannot freely circulate around the
unit, or directly exposed to the sun.
The mounting location should also allow space for the Wind Interface Box
and the Diversion load.
Minimum clearance requirements on the sides easily access the side cover
and to obtain the best performance of the unit are as per the following
figure:
Fig.5 Minimum clearance requirements
500 mm (18”)
500 mm (18”)
>100 mm
(4”)
>300 mm
(12”)