Audiovox Rampage ACD95 - Manual (Page 5)

128-6566
5 of 20
5 5 5 5 5
INSTINSTINSTINSTINST
ALLALLALLALLALL
AAAAA
TTTTT
ION INSTRUCION INSTRUCION INSTRUCION INSTRUCION INSTRUC
TTTTT
IONSIONSIONSIONSIONS
OPERATING INSTRUCTIONS
1 1 1 1 1
POWER PRESS (ON-OFF) BUTTON ( )
Press this button in the center of the AUDIO
ADJUST control to turn the unit on or off. If the
panel is in the lowered position when the ig-
nition switch is turned off, or if the POWER
button is pressed, the panel will automati-
cally rise to the closed position and the unit
will then turn off.
2 2 2 2 2
AUDIO ADJUST (LEVEL) CONTROL
To increase the volume level, turn the AUDIO
ADJUST knob clockwise (CW). The volume
level will be shown on the display panel from
a minimum of 00 to a maximum of 32. To
decrease the volume level, turn the knob coun-
terclockwise (CCW). The display will auto-
matically return to the normal indication 5 sec-
onds after the last volume adjustment or
when another function is activated. This con-
trol is also used in conjunction with the Se-
lect (SEL) control button
3
to adjust the
bass, treble, balance and fader levels as
described in
4
,
5
,
6
and
7
.
3 3 3 3 3
SELECT (SEL) CONTROL BUTTON
This button is used to select the audio
function (volume, bass, treble, balance or
fade) whose setting is adjusted using the
AUDIO ADJUST control 2. Pressing the SEL
button once will set the unit for bass
adjustment (BAS will appear on the display
panel). Pressing the button additional times
will select treble adjustment (TRE on the
display), balance
(BAL), fader (FAd) and
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
1
2
3, 4, 5, 6, 7
9
18
31
42 30
41 29
40 28
16
13
33
14
17 21 12
36
10
15
8
22,23,24 19 25,32
20 (CD IN
JACKS
ON REAR
PANEL)
11
26
27
38
39
34 37
MUTE
LOUD
SEL
T/F
BAND
EQ
MANU
SKIP
ACD-94
3 in 1 CD CASSETTE RECEIVER
POWER
PRESS
AUDIO
ADJUST
MODE
M/S AS
PS LOC 1 PAU SCN 2 RPT 3 RND 4 D.DN 5 6 D.UP
35