Audiovox Rampage ACD95 - Manual (Page 6)

128-6566
6 of 20
6 6 6 6 6
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
volume (VOL). The display will automatically
return to the normal indication 5 seconds after
the last adjustment or when another function
is activated.
NOTE: If the Equalizer function
9
is active,
the BAS and TRE settings will not be
available; they are accessible only when
no equalizer setting is present.
4 4 4 4 4
BASS CONTROL
To adjust the bass level (equalizer function
inactive), first select the Bass mode by pressing
the SEL button
3
so the BAS indication
appears on the display panel. Within 5 seconds
of choosing the Bass mode, rotate the AUDIO
ADJUST control
2
counterclockwise (CCW)
to decrease the bass response, or CW to
increase it as desired.The level will be shown
on the display panel from a minimum - 7 to a
maximum of + 7 (0 indicates flat response).
The display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
5 5 5 5 5
TREBLE CONTROL
To adjust the treble level (equalizer function
inactive), first select the Treble mode by
pressing the SEL button
3
so the TRE
indication appears on the display panel. Within
5 seconds of choosing the Treble mode, rotate
the AUDIO ADJUST control
2
counterclockwise (CCW) to decrease the treble
response, or CW to increase it as desired. The
level will be shown on the display panel from a
minimum - 7 to a maximum of + 7 (0 indicates
flat response). The display will automatically
return to the normal indication 5 seconds after
the last adjustment or when another function
is activated.
6 6 6 6 6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the
Select button
3
so the BAL indication
appears on the display panel. Within 5
seconds of choosing the Balance mode, turn
the AUDIO ADJUST control
2
counter-
clockwise to adjust the stereo balance to the
right channel speakers or clockwise to adjust
it to the left channel speakers. The balance
position will be shown on the display panel
from R 15 (full right) to L 15 (full left). When
the volume level between the left and right
speakers is equal, BAL - 0 will be shown on
the display panel. The display will
automatically return to the normal
indication 5 seconds after the last adjustment
or when another function is activated.
7 7 7 7 7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first
select the Fader mode by pressing the Select
button
3
so the FAd indication appears on
the display panel. Within 5 seconds of
choosing the Fader mode, turn the AUDIO
ADJUST control
2
counterclockwise to adjust
the front-rear speaker balance to the front
speakers or clockwise to adjust it to the rear
speakers. The fader position will be shown
on the display panel from F 15 (full front) to F
15 (full rear). When the level between the front
and rear speakers is equal, F - BAL will be
shown on the display panel. The display will
automatically return to the normal indication
5 seconds after the last adjustment or when
another function is activated.
8 8 8 8 8
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels,
this feature will boost the bass and treble
ranges to compensate for the characteristics
of human hearing. Press the LOUD button