DAVIS Energy EnviroMonitor: Console - Manual (Page 45)

Using the Energy EnviroMonitor
Page 38 Energy EnviroMonitor Manual
R ELATIVE H UMIDITY
The Energy EM displays the current relative humidity. In addition, you may
view the high and low relative humidity along with the time at which they
occurred.
Viewing Humidity
1. To display the current humidity, press HUM.
The current humidity appears on the right of the display.
C URRENT R ELATIVE H UMIDITY
2. To display the status of the AutoClear function for high and low humidity (On/Off),
press HUM again.
If the AutoClear function is enabled, the word On appears on the right of the
display. If the AutoClear function is disabled, the word OFF appears on the
right of the display. (See “Enabling/Disabling AutoClear” on page 50 for
instructions.)
3. Continuing to press HUM will alternate between the current humidity and the Auto-
Clear status.
Displaying Highs and Lows
The Energy EM displays the high and low humidity along with the time at
which it occurred. For information on displaying and clearing highs and lows,
see “Highs and Lows” starting on page 44.
Alarms
You may set a high and a low alarm for humidity. For information on display-
ing, setting, and clearing alarms, see “Alarms” starting on page 46.