DAVIS Complete System Shelter - Manual (Page 3)

3
Tools and Materials Needed for Installation
You may need some of the following tools and materials in order to install the
shelter.
• System Components
You will need the various system components you plan to install inside the
shelter. Some sample installation configurations are shown in “Sample CSS
Configurations” on page 5.
• Medium Flat Head Screwdriver
• Medium Phillips Head Screwdriver
• Wrench or 3/8” Nut Driver
• Large Adjustable Wrench (1 3/8” Opening)
• Electric Drill with #43 (.089”, 2.25 mm) and #36 (.106”, 2.70 mm) Drill Bits
• Wire Cutter
• Wire Stripper or Knife
• Pliers
• Electrical Tape and/or Silicone Caulking
• Double‐Sided Tape
Installing Ground Lug
Install the ground lug using a #10‐32 screw, #10 washer, #10 split lock washer,
and #10 hex nut as shown below.
Installing Ground Lug