DAVIS Complete System Shelter - Manual (Page 9)

9
Installing a Weather Wizard III Console and Small Junction
Box
You may install a Weather Wizard III console and small junction box in the
CSS, as shown below, with the nylon insulators and #4 x 1/2” (12.5 mm) self‐
tapping screws supplied with the hardware kit. You may install the small junc‐
tion box into the CSS, using double‐stick pads, double‐sided tape, or the screws
shown below. If using the screws, you will have to drill a hole in one of the
locations shown below using the indicated drill bit. Use a pencil or a center‐
punch to mark the location of the hole before drilling.
(Optional)
Installing a Weather Wizard III Console and Small Junction Box